Casting Design Review
Our engineers are here and glad to support you.
We could advice about:
•Part Structure: include thickness, rib, fillet, draft angle, tolerance, etc
•Moldable: check parting line, ejector pin position, runner gate, etc
•Castability: check where could have defects, and improve cast parameters.
Casting Defect diagnose
If your current parts have defects, we could help you to diagnose.
•Gas porosity
•Cracks
•Solder
•Deformation
•Break
etc
Mold Problem Diagnose
Mold problems normal 60% are mold design, 30% are mold manufacture, and 10% due to material and heat treatment.
•Check runner gate size
•Check runner shape
•Check mold size
•Check thermal balance
etc
Mold Design Correction
We also could help you to correct your mold design. Just give us your current mold 3d drawing.